Garage, workshop and commercial floors

Epoxy flooring in Perth

Epoxy is a hard resin coating bonded to ground concrete. It takes oil, chemicals and heavy traffic, and it can be one plain colour, flecked with flake or swirled with metallic pigment. We lay solid colour, flake, metallic and polyaspartic systems on Perth garages, workshops, warehouses and commercial floors.

Price
After the free measure
Systems
Solid, flake, metallic, polyaspartic
First step
Free on-site measure

Solid colour, flake, metallic or polyaspartic

All four go over ground concrete. The difference is how they look, how well they hide dust and marks, and how they cope with sun and wet shoes.

Solid colour

One even colour, usually a grey, under a gloss or satin topcoat. It's the simplest system and the cleanest look for workshops and warehouses, where it also makes line marking easy to see. Dust, tyre marks and fine scratches show more on a plain colour than on flake.

Flake

Coloured vinyl flakes are broadcast into the wet base coat, as a light scatter or full coverage, then locked under a clear topcoat. The flecked pattern hides dust, marks and small slab imperfections, and the slight texture adds grip. That's why it's the usual choice for home garages.

Metallic

Metallic pigments are worked through the resin to make a swirling, marbled finish with real depth, a little like stone or water. No two floors come out the same. It's mostly used indoors, in showrooms, home bars and living spaces, and it needs an anti-slip topcoat anywhere it might get wet.

Polyaspartic

A coating related to polyurethane that cures much faster than epoxy and holds its colour better in sunlight. It's used as a topcoat over an epoxy base or as a system on its own. In a Perth garage whose door is open to the afternoon sun, or a business that can't be closed for long, it's worth asking about.

Epoxy or polished concrete?

Both make a hard, easy-clean floor, but they get there in opposite ways. Epoxy covers the concrete with a coating. A polished floor is the concrete itself, refined until it shines.

For a garage floor that's stained, patched or cracked, epoxy usually looks better because it hides the slab completely. It also handles oil and chemicals better. For a living area, polished concrete is the more natural choice, with no coating to wear or recoat.

Epoxy and polished concrete compared
EpoxyPolished concrete
How it worksA resin coating bonded on top of ground concreteThe concrete itself, ground and refined
Oil and chemicalsVery resistant, spills wipe offDensified and guarded, but oil can still mark
LookColour, flake or metallic that covers the slabShows the stone and the slab's history
Grip when wetNeeds anti-slip in wet areasSlippery at satin and gloss
Long termTopcoat wears and can be recoated, can chip under heavy impactNo coating to wear, occasional re-polish
Usually suitsGarages, workshops, warehousesLiving areas, retail, showrooms

Preparation decides whether epoxy lasts

Epoxy is only as strong as its bond to the concrete. When an epoxy floor peels, bubbles or lifts in the tyre tracks, the cause is almost always what happened before the coating went down.

Diamond grinding removes the weak top skin of the slab along with old paint, sealer and oil-soaked concrete, and leaves an open texture the resin can grip. It's the first stage of every epoxy floor we lay, and our concrete grinding page explains it in more detail.

Moisture is the other big risk. Water vapour rising through a slab can push a coating off from underneath, so we check for it before coating, particularly in older garages and on slabs poured straight onto the ground. Cracks, holes and damaged joints are repaired before the base coat goes down, because a coating bridges over a defect rather than fixing it.

Epoxy garage floors in Perth

A garage floor deals with things no other floor in the house does.

Hot tyres

Tyres come home hot on a Perth summer afternoon, and on a poorly bonded or soft coating they can lift it off the slab. Proper grinding and a hard topcoat prevent it.

Oil and fuel

Epoxy doesn't soak up oil the way bare concrete does, so drips wipe straight off. Brake fluid and some solvents can mark a coating if they're left to sit, so clean those up promptly.

Sun through the door

Most epoxy slowly yellows in direct sunlight. If your garage door is often open to the west, a UV-stable polyaspartic or polyurethane topcoat keeps the colour truer for longer.

Wet tyres and shoes

A gloss coating is slippery with water on it, and garages get wet on rainy days. Flake adds some texture, and anti-slip can be mixed into the topcoat.

Getting the car back in

You can usually walk on the floor within a day or so of the topcoat, but cars need the coating to cure further. Polyaspartic systems are back in use sooner. We give you the times for your system.

What to clear out

The garage needs to be completely empty, including shelving fixed to the floor. Plan where the car, bikes and tools will live for the days the floor is out of action.

Warehouse, workshop and commercial epoxy floors

Commercial floors are specified around what they have to survive. A warehouse with forklifts and pallet jacks needs a thicker, heavy-duty system. A mechanical workshop needs resistance to oils, fuels and solvents. Wet areas and food spaces need anti-slip and a surface that cleans easily. Line marking for walkways, bays and hazard zones can be built into the coating.

The other question is downtime. Epoxy needs time to cure, so we plan around your trading or operating hours, staging large floors section by section, or using faster-curing polyaspartic systems where the floor has to be back in use sooner. For polished floors in shops, offices and showrooms, see commercial polished concrete.

How an epoxy floor is laid

An epoxy floor goes down in layers over a few days, and each one has to cure enough before the next goes on. Some systems have a strong smell while they cure, so we'll talk about ventilation, especially for garages under the house or attached to living areas.

Temperature matters too. Perth summer heat shortens the working time of the resin, so on hot days we start early, and in cold weather curing takes longer.

  1. Measure and check. We check the slab for moisture, cracks and old coatings, and talk through finishes.
  2. Grind. Diamond grinding opens up the concrete and removes anything that would weaken the bond.
  3. Repair. Cracks, holes and damaged joints are filled.
  4. Prime and base coat. The first resin layers bond to the concrete and set the colour.
  5. Decorative coat. Flake is broadcast or metallic is worked in, if you've chosen one.
  6. Topcoat. A clear or coloured topcoat seals it all in, with anti-slip if needed.
  7. Cure. The floor is left to harden before foot traffic, then vehicles.

What epoxy flooring costs

We price epoxy after the free measure, because preparation varies so much from floor to floor. A clean slab costs far less to prepare than one with old paint, a failed DIY coating, oil-soaked patches or cracks to repair.

After that, the price comes down to the system and finish, with solid colour simpler than flake and metallic, plus the area, anti-slip or line marking, and how the work has to be staged around your use of the space.

At the free measure

We check the slab for moisture, cracks and old coatings, show you finish options, and give you a price for the system that suits how the floor will be used.

Book a free measure

Looking after an epoxy floor

Keep grit off it

Sand and grit dragged under tyres and shoes dull the topcoat over time. A mat at the door and a regular sweep make the biggest difference.

Clean gently

A soft mop with a mild, pH-neutral cleaner is all it needs. Harsh solvents and abrasive pads can dull or soften the surface.

Protect from point loads

Put plates under jack stands and motorbike stands, and lift heavy items rather than dragging them. A dropped tool can chip the coating, and chips are easier to repair early.

Recoat before it wears through

When the topcoat looks dull in the tyre tracks or walkways, a fresh topcoat brings it back without redoing the whole floor.

Epoxy flooring questions

How much does an epoxy garage floor cost in Perth?

We price after the free measure, because preparation varies so much between garages. A clean slab costs far less to prepare than one with old paint, a peeling DIY coating or cracks to repair, and solid colour costs less than flake or metallic. You'll get a price for your floor at the measure.

How long does epoxy flooring last?

A properly prepared, professionally laid system lasts many years in a home garage. The topcoat is the part that wears, and it can be recoated when it dulls rather than replacing the whole floor. Heavy commercial use wears it faster, which is why those floors get thicker systems.

Is epoxy flooring slippery?

A gloss epoxy can be slippery when wet. Flake gives a little texture, and anti-slip mixed into the topcoat gives much better grip. We add it in garages, wet areas and anywhere people walk in from the rain.

Will epoxy turn yellow?

Most epoxy slowly yellows in direct sunlight, which is why it's mostly used indoors. In a garage that gets a lot of sun through an open door, a UV-stable polyaspartic or polyurethane topcoat keeps the colour truer.

Can you put epoxy over an old coating?

Not usually. Old paint, epoxy or sealer is ground off first so the new system bonds to the concrete itself. A coating laid over an old layer is only as strong as that old layer's bond.

How long before I can drive on a new epoxy floor?

Walking is usually fine within a day or so of the topcoat, and cars need longer while the coating cures further. Polyaspartic systems are back in service sooner. The exact times depend on the system and the weather, and we'll give them to you for your floor.

Should I choose epoxy or polished concrete for my garage?

If the slab is stained, patched or cracked, or you want colour or flake, epoxy is usually the better choice, and it handles oil and chemicals well. If the slab is in good condition and you'd like the look of the concrete itself with no coating to recoat, polished concrete can work in a garage too.

Free on-site measure and quote

Book your free measure

Send us a few details and we'll be in touch to arrange a time to look at your slab, measure up and price the finish you want. There's no cost and no obligation.

What helps us quote

Whether it's a garage, workshop, warehouse or commercial floor, roughly how many square metres, the finish you like (solid colour, flake or metallic), and whether there's any old paint or coating on the slab now.

Tell us about your floor

All fields are needed so we can get back to you.

No obligation. We only use your details to reply to you. Privacy policy

Call now Free quote