Exposed aggregate cleaning and resealing

Exposed aggregate sealing in Perth

Exposed aggregate looks its best when the sealer is fresh. Once Perth sun wears that sealer away, the stone fades, stains soak in and the surface turns chalky. A proper clean and reseal usually brings it back. We restore and reseal exposed aggregate driveways, paths, alfresco areas and pool surrounds, whoever laid them.

Surfaces
Driveways, paths, alfresco, pools
Price
After a site check
First step
Free on-site measure

What a proper reseal involves

When an exposed aggregate reseal fails early, it's usually for one reason: the new sealer went over a surface that wasn't clean or dry. Sealer locks in whatever is underneath it, whether that's dirt, oil, a white haze from the last coat or moisture still in the slab. So most of the work happens before any sealer goes on.

Outdoor sealing needs a dry slab and settled weather. After rain the concrete has to dry out first, which in a Perth winter can mean waiting a few days for the right window. In summer we seal early in the day, because sealer laid on a hot slab dries too fast and can bubble.

We don't lay concrete. All the exposed aggregate we work on was put down by a concreter, and our job is getting it back to looking the way it should.

  1. Inspect and test. We check what sealer is on there now and how well it's holding, because some sealers won't bond over others.
  2. Deep clean. Dirt, mould and grime come off with a surface cleaner at a safe pressure, so stones aren't blasted loose.
  3. Strip where needed. Sealer that's peeling, white or failing is stripped back, so the new coat bonds to concrete rather than to a coat that's already letting go.
  4. Treat stains. Oil, rust and leaf stains get a treatment suited to each. Some lift completely, some only lighten.
  5. Dry. The slab is left to dry properly. Sealing over damp concrete is the most common cause of a cloudy white finish.
  6. Seal. Your chosen sealer goes on, with anti-slip grit where the surface gets wet or people walk barefoot.

Common exposed aggregate problems, and what can be fixed

Most tired exposed aggregate comes back well. Some damage can only be improved, and it's better to know which before you pay for a reseal.

Faded, colourless stone

Usually just worn-out sealer. A clean and reseal brings the colour back, and a wet-look sealer can make the stone look richer than the day it was laid.

Milky or white sealer

This is called blushing, and it usually means moisture got trapped in or under the sealer, often from sealing too soon after rain. A solvent can sometimes turn a solvent-based sealer clear again. If it can't, the sealer has to be stripped and redone.

Peeling in the tyre tracks

Hot tyres on a summer afternoon can soften some sealers and lift them off the concrete. The fix is stripping the failed sealer in those areas and using one made for vehicle traffic.

Orange rust stains

Plenty of Perth bores carry iron, and reticulation that sprays the driveway leaves orange marks. They can usually be lightened a lot with a rust remover made for concrete. Angle the sprinklers away afterwards or they'll come back.

Oil drips

Fresh drips clean up well. Old oil that has soaked deep can often be drawn partly back out with a degreaser, but it may leave a shadow. A drip tray under the car is cheaper than any treatment.

Brown leaf stains

Wet leaves, gum nuts and flowers leave tannin stains. They're treated before sealing, because sealing over them locks them in.

White powdery deposits

Efflorescence is salt carried up through the concrete by water and left behind as it dries. It's cleaned off before sealing. If water keeps reaching the slab from a garden bed or a sprinkler, it can come back.

Loose stones

Stones popping out where cars turn usually means the surface was washed back too far when it was laid, or the sealer has worn away. A good sealer helps hold stones that are starting to loosen, but the gaps where stones have already gone won't disappear.

Choosing a sealer for exposed aggregate

The biggest choice is the look. A wet-look sealer is a film that deepens the colour of the stone and gives the slab a glossy, just-hosed appearance. It's the popular choice for driveways. A natural or matte sealer keeps the stone close to its dry colour and has more grip, which makes it the safer pick on steep driveways and around pools.

Sealers also differ in what they're made with. Solvent-based acrylics soak in and bond well, give the deepest colour and smell strongly while they go on. Water-based sealers have less odour, but some won't stick properly over an old solvent-based coat. What's already on your slab partly decides what can go on next, which is why we test before we quote.

Then there's Perth's sun. West-facing driveways and alfresco areas take a lot of hot afternoon sun, and a UV-stable sealer keeps its colour and finish longer there. On driveways, a sealer rated for vehicles resists the hot tyre peeling described above. Around pools, add anti-slip grit and use a sealer that suits salt or chlorine water. Our concrete sealing page covers sealers for plain concrete and other surfaces.

What resealing exposed aggregate costs

We price resealing after a site check, because two driveways the same size can be very different jobs. A slab with sound sealer that needs a clean and a fresh coat costs far less than one where old sealer has gone white or started peeling and has to be stripped first.

The rest comes down to the area, how much stain treatment is needed, the sealer you choose and how many coats it takes, and access, such as getting equipment through to a backyard pool area.

At the free measure

We look over the whole surface, test how the old sealer is holding up and check the stains. Then you get a price for the work your slab actually needs, along with an honest view on anything that won't come out.

Book a free measure

Keeping exposed aggregate looking good in Perth

Reseal before it's worn through

Do the water test every so often. Once water stops beading and soaks in, reseal then rather than waiting until the stone is grey, because a slab that still has some sealer left needs less preparation.

Sweep before rain

Sand wears the sealer, and wet leaves and gum nuts stain. A quick sweep or blow-off, especially before rain, saves a lot of stain treatment later.

Keep water and oil off it

Angle reticulation away from the slab to stop rust stains and salt deposits, and put a drip tray under any car that leaks.

Go easy with the pressure washer

A narrow jet held close can strip sealer and knock stones loose. Use a wide fan or a surface cleaner, and keep the nozzle well back.

Exposed aggregate sealing questions

How often should exposed aggregate be resealed in Perth?

Driveways and areas in full afternoon sun often need it every couple of years, while shaded paths and covered alfresco areas last longer. The water test tells you: when water soaks in and darkens the concrete instead of beading on top, it's time.

Why has my exposed aggregate sealer gone white?

White or milky sealer usually means moisture got trapped in or under it, often because it went on before the slab had dried out after rain, or the sealer was laid too thick. Sometimes a solvent can turn it clear again. If not, the sealer is stripped and the slab resealed once it's properly dry.

Can you reseal exposed aggregate that someone else laid?

Yes. We don't lay concrete, so all the exposed aggregate we clean and reseal was laid by someone else. We test the existing sealer first so the new one bonds to it or replaces it properly.

Will resealing make my exposed aggregate slippery?

A glossy wet-look sealer can be slippery when wet, especially on a sloping driveway or near a pool. Anti-slip grit mixed into the sealer, or a natural matte sealer, keeps good grip. Tell us where people walk wet or barefoot and we'll seal those areas to suit.

How long before I can walk and drive on it after resealing?

Foot traffic is usually fine within hours. Cars need longer, as the sealer keeps hardening after it feels dry, and the wait depends on the sealer and the weather. We'll tell you the times for your job and when to park elsewhere.

Can you fix loose stones in exposed aggregate?

A good sealer helps hold stones that are just starting to loosen. Stones that have already come out leave small holes that can't be made invisible. If a large area is breaking up, resealing won't solve it, and we'll tell you that at the measure.

Do you lay new exposed aggregate?

No. For a new exposed aggregate driveway, path or alfresco area you'll need a concreter. When it needs resealing in a few years, that's where we come in.

Free on-site measure and quote

Book your free measure

Send us a few details and we'll be in touch to arrange a time to look at your slab, measure up and price the finish you want. There's no cost and no obligation.

What helps us quote

Where the exposed aggregate is (driveway, path, alfresco or pool), roughly how many square metres, when it was last sealed if you know, and what's wrong with it, such as faded, white, peeling or stained. Photos help, and you can email them to contact@polishedconcretefloorsperth.com.au.

Tell us about your floor

All fields are needed so we can get back to you.

No obligation. We only use your details to reply to you. Privacy policy

Call now Free quote